FANUC Alarm CVIS-144 — The name has been truncated to '%s'.

FANUC CVIS-144 (“The name has been truncated to '%s'.”): The specified tool name is too long and therefore truncated to a valid length. First check: If truncating the tool name poses a problem, specify a shorter tool name.

Updated 2026-08-29 · LogrobotLM reference

Description

The specified tool name is too long and therefore truncated to a valid length.

Remedy · Remède

If truncating the tool name poses a problem, specify a shorter tool name.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-144 mean?: FANUC CVIS-144 (“The name has been truncated to '%s'.”): The specified tool name is too long and therefore truncated to a valid length.
How do you troubleshoot FANUC alarm CVIS-144?: If truncating the tool name poses a problem, specify a shorter tool name.

Related codes / Codes liés

CVIS-142The tool name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|, and be 8 characters or less.CVIS-143The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)CVIS-145The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)CVIS-146There is no image.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →