LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-145 — The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)

FANUC CVIS-145 (“The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)”): An attempt was made to perform another operation while an image was being displayed in live mode. First check: Complete the live mode display before performing another operation.

Updated 2026-09-17 · LogrobotLM reference

Description

An attempt was made to perform another operation while an image was being displayed in live mode.

Remedy

Complete the live mode display before performing another operation.

Related codes

CVIS-143The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)CVIS-144The name has been truncated to '…'.CVIS-146There is no image.CVIS-147Load failed for ….

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →