LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-164 — No robot position for robot mounted camera

FANUC CVIS-164 (“No robot position for robot mounted camera”): In the case of robot a mounted camera, the robot position is needed to compute the part position. First check: Snap the image from a camera.

Updated 2026-09-17 · LogrobotLM reference

Description

In the case of robot a mounted camera, the robot position is needed to compute the part position. However, the robot position is not set. Maybe the image is loaded from a file.

Remedy

Snap the image from a camera.

Related codes

CVIS-162No camera calibration selectedCVIS-163No reference robot position for tool offsetCVIS-165No robot position for tool offsetCVIS-166Vision Standard DEMO expired

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →