LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-214 — Laser calibration fails.

FANUC CVIS-214 (“Laser calibration fails.”): No calibration data was calculated for the 3D laser sensor. First check: Perform calibration again.

Updated 2026-09-17 · LogrobotLM reference

Description

No calibration data was calculated for the 3D laser sensor.

Remedy

Perform calibration again.

Related codes

CVIS-212No robot position for robot mounted camera.CVIS-213Robot positions for two points must be the same.CVIS-215Laser frame cannot be calculated.CVIS-216Laser window is not trained.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →