LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-212 — No robot position for robot mounted camera.

FANUC CVIS-212 (“No robot position for robot mounted camera.”): The robot position at calibration is needed for the robot-mounted camera. First check: You cannot use an image file for calibration of robot-mounted camera.

Updated 2026-09-17 · LogrobotLM reference

Description

The robot position at calibration is needed for the robot-mounted camera.

Remedy

You cannot use an image file for calibration of robot-mounted camera. Snap a new image from a camera instead of loading image file.

Related codes

CVIS-210The calibration points are too close to each other.CVIS-211The calibration points are too close to each other.CVIS-213Robot positions for two points must be the same.CVIS-214Laser calibration fails.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →