LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-300 — The value of Light Output Signal Number … is out of range. The valid range is … to ….

Manufacturer wording — The value of Light Output Signal Number %s is out of range. The valid range is %s to %s.
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC CVIS-300 (“The value of Light Output Signal Number … is out of range. The valid range is … to ….”): The specified value of Light Output Signal Number is out of range.

Updated 2026-09-17 · LogrobotLM reference

Remedy

The specified value of Light Output Signal Number is out of range.

Related codes

CVIS-298There is not TEMP memory to run DVM at this time.CVIS-299Snap camera port … failed. Code ….CVIS-301Edge pair is not selected. Select found item from results table.CVIS-302Part is not selected. Select found item from results table.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →