LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm FRCE-160 — F/S cable is cut (F:…)

Manufacturer wording — F/S cable is cut (F:%d^1)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC FRCE-160 (“F/S cable is cut (F:…)”): Cable is cut. First check: Re-connect or replace the cable.

Updated 2026-09-17 · LogrobotLM reference

Description

Cable is cut.

Remedy

Re-connect or replace the cable.

Related codes

FRCE-158F/S gauge data overflow (F:…)FRCE-159F/S sensor limit overflow (F:…)FRCE-161F/S timeout error (F:…)FRCE-162F/S temperature data overflow (F:…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →