LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm GUID-159 — SERVO Force sensor comm failure

FANUC GUID-159 (“SERVO Force sensor comm failure”): Force sensor comm failure Communication failed on FS I/F board. First check: Replace sensor head, interface board, and/or cable. Likely part: Sensor head (Sensor head).

Updated 2026-09-17 · LogrobotLM reference

Description

Force sensor comm failure Communication failed on FS I/F board.

Remedy

Replace sensor head, interface board, and/or cable.

Part to check / replace

FANUC GUID-159 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

GUID-157SERVO Force sensor outer parityGUID-158SERVO Force sensor inner parityGUID-160SERVO Force sensor comm failureGUID-161SERVO Force sensor comm failure

Same hardware involved

FRCE-156Sensor headFRCE-158Sensor headFRCE-162Sensor headFRCE-163Sensor head

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →