LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-207 — PAUSE Group I/O port access error

Manufacturer wording — PAUSE (%s^4, %d^5) Group I/O port access error
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-207 (“PAUSE Group I/O port access error”): Group I/O is not functioning properly. First check: Refer to the error cause code.

Updated 2026-09-17 · LogrobotLM reference

Description

Group I/O is not functioning properly.

Remedy

Refer to the error cause code. Use MENU to display the Alarm Log screen.

Related codes

INTP-205PAUSE Analog port access errorINTP-206PAUSE Digital port access errorINTP-208PAUSE Divide by 0INTP-209PAUSE SELECT is needed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →