LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-258 — PAUSE Weld port access error

Manufacturer wording — PAUSE (%s^4, %d^5) Weld port access error
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-258 (“PAUSE Weld port access error”): The weld is not functioning properly. First check: Refer to the error code.

Updated 2026-09-17 · LogrobotLM reference

Description

The weld is not functioning properly.

Remedy

Refer to the error code. Use MENU to display the Alarm Log screen.

Related codes

INTP-256PAUSE No data for CAL_MATRIXINTP-257PAUSE Invalid delay timeINTP-259PAUSE Invalid position typeINTP-260PAUSE Invalid torque limit value

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →