LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-288 — PAUSE Parameter does not exist

Manufacturer wording — PAUSE (%s^4, %d^5) Parameter does not exist
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-288 (“PAUSE Parameter does not exist”): The parameter designated by AR register does not exist. First check: Please confirm the index of AR register and the parameter in CALL/MACRO command in main program.

Updated 2026-09-17 · LogrobotLM reference

Description

The parameter designated by AR register does not exist.

Remedy

Please confirm the index of AR register and the parameter in CALL/MACRO command in main program.

Related codes

INTP-286WARN MAINT program isn't defined in fast fautl recoveryINTP-287PAUSE Fail to execute MAINT programINTP-289PAUSE Can't save ffast point at program changeINTP-290PAUSE Fast fault recovery position is not saved

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →