LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-362 — PAUSE FRAME:P3 is same as P1

Manufacturer wording — PAUSE (%s^4, %d^5) FRAME:P3 is same as P1
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-362 (“PAUSE FRAME:P3 is same as P1”): KAREL program error. First check: Teach P1 and P3 as different points.

Updated 2026-09-17 · LogrobotLM reference

Description

KAREL program error. The X-Y plane cannot be calculated in the FRAME built-in routine be P1 and P3 are the same point.

Remedy

Teach P1 and P3 as different points.

Related codes

INTP-360ABORT Vector is 0INTP-361PAUSE FRAME:P2 is same as P1INTP-363PAUSE FRAME:P3 exists on line P2-P1INTP-364ABORT String too short for data

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →