LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm ISD-053 — WARN Excessive error during stop (IPS%d)

Description

A sudden change in load, inadequate air supply , ma lfunctioning servo-valve or poor servo tuning d excessive error in the pneumatic servo position. This alarm is posted when the positional error (in mm.) of that axis, when stationary, exceeds $IPS_CONFIG[n].$POSERR_MAX2, where n is the number specified in the alarm.

Remedy · Remède

Press RESET to continue the operation. Verify that adequate air supply is available. See if the air pressure dips considerably during meter operation. This indicates that the air cylinder is starved for air..

Related codes / Codes liés

ISD-051WARN Velocity command excessive (IPS%d)ISD-052WARN Excessive positional error (IPS%d)ISD-054WARN Excessive error during move (IPS%d)ISD-055STOP Servo Enab o/p not assigned (IPS%d)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.