LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm MEMO-130 — SYST Please power up again

Error
Hardware
main board and memory
Controllers
R-J3iB / R-30iA
FANUC class
SYSTEM
Hardware family
FANUC storage media alarms: memory card, USB, F-ROM and corrupted data

FANUC MEMO-130 (“SYST Please power up again”): The data of the system been broken. First check: Please power up again.

Updated 2026-10-22 · LogrobotLM reference

Description

The data of the system been broken.

Remedy

Please power up again.

Field diagnosis

The system data is corrupted.

What to check

  • Switch the power off and back on; if the code returns, restore a backup and check the main board battery.
  • Note: System alarm.

Related codes

MEMO-131SYST Please power up againMEMO-133SYST Please power up againSYST-035WARN Low or No Battery Power in PSU.MEMO-127WARN Pos reference over 255 timesMEMO-128WARN … parameters are differentMEMO-132WARN … has been broken

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →