LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-232 — WARN Enabling HrdEnb+MixSol not allowed

FANUC PAIN-232 (“WARN Enabling HrdEnb+MixSol not allowed”): An attempt was made to enable the Mix Hardener Valve with the Mix Solvent Valve enabled. First check: Check the cycle data table and make sure the Mix Hardener and Mix Solvent outputs are never ON at the same time.

Updated 2026-09-17 · LogrobotLM reference

Description

An attempt was made to enable the Mix Hardener Valve with the Mix Solvent Valve enabled.

Remedy

Check the cycle data table and make sure the Mix Hardener and Mix Solvent outputs are never ON at the same time.

Related codes

PAIN-230WARN Mix valves setup incompletePAIN-231WARN Enabling ResEnb+MixSol not allowedPAIN-233WARN Enabling ResEnb+MixAir not allowedPAIN-234WARN Enabling HdrEnb+MixAir not allowed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →