FANUC Alarm PAIN-233 — WARN Enabling ResEnb+MixAir not allowed
FANUC PAIN-233 (“WARN Enabling ResEnb+MixAir not allowed”): An attempt was made to enable the Mix Resin Valve with the Mix Air Valve enabled. First check: Check the cycle data table and make sure the Mix Resin and Mix Air outputs are never ON at the same time.
Updated 2026-08-29 · LogrobotLM reference
Description
An attempt was made to enable the Mix Resin Valve with the Mix Air Valve enabled.
Remedy · Remède
Check the cycle data table and make sure the Mix Resin and Mix Air outputs are never ON at the same time.
Frequently asked · Questions fréquentes
- What does FANUC alarm PAIN-233 mean?
- FANUC PAIN-233 (“WARN Enabling ResEnb+MixAir not allowed”): An attempt was made to enable the Mix Resin Valve with the Mix Air Valve enabled.
- How do you troubleshoot FANUC alarm PAIN-233?
- Check the cycle data table and make sure the Mix Resin and Mix Air outputs are never ON at the same time.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →