LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-247 — ABRT No TPR calculated for job

FANUC PAIN-247 (“ABRT No TPR calculated for job”): The PGOT procedure was not performed on the processes used within the selected job (style).The TPR is equal to zero. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

The PGOT procedure was not performed on the processes used within the selected job (style).The TPR is equal to zero. No Preset Gun On Time for job couldbe found. Job has not been testcycled.: Perform the PGOT procedure on the desired job (style). Test cycle job or allow it correct itself by running the process inproduction, if enough paint has been loaded into the canister.

Remedy

N/A

Related codes

PAIN-244WARN Docking station not extendedPAIN-245WARN Robot NOT at docking positionPAIN-248WARN … abort, can fill timeoutPAIN-249WARN … abort, can empty timeout

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →