LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-257 — WARN Canister Out Of Paint

Manufacturer wording — WARN (%s) Canister Out Of Paint
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PAIN-257 (“WARN Canister Out Of Paint”): Canister ran out of paint duringthe job.: Verify proper TPR was calculated. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

Canister ran out of paint duringthe job.: Verify proper TPR was calculated. Verify the fill is completing successfully. Check for other alarms that occurred during this job. Make sure all equipment is operating properly,such as the trigger or regulator. Check can empty timeout value (default = 1500 ms). Perform Auto Calibration on that color if all parts are operating properly. Increase the Flow Control Confidence parameter in the AccuStat setup screen to help prevent running out of paint.

Remedy

N/A

Related codes

PAIN-255WARN Calculated output > Max OutputPAIN-256WARN Calculated output < Min OutputPAIN-259WARN Failed to reach setpointPAIN-260WARN TPR exceeds Can Volume

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →