LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-255 — WARN Calculated output > Max Output

FANUC PAIN-255 (“WARN Calculated output > Max Output”): The calculated command counts are above the Applicator Parameter Maximum Output value (1000 counts, or 8000 counts hires). First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

The calculated command counts are above the Applicator Parameter Maximum Output value (1000 counts, or 8000 counts hires). Fluid restrictor is too small orthe regulator is not working properly.: Determine what is limiting theflow rate. Check the Color DataHi/Low flow range settings. PAIN- 256, Calculated output < min output

Remedy

N/A

Related codes

PAIN-253WARN Beaker Timeout, Scale Cal AbortedPAIN-254WARN Non-increasing cal tablePAIN-256WARN Calculated output < Min OutputPAIN-257WARN Canister Out Of Paint

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →