LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-385 — WARN Spray behind job … position

Manufacturer wording — WARN Spray behind job %s position
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PAIN-385 (“WARN Spray behind job … position”): The current speed of the conveyor is too fast for the speed, etc. First check: Decrease the speed at wich the conveyor is moving.

Updated 2026-09-17 · LogrobotLM reference

Description

The current speed of the conveyor is too fast for the speed, etc. of this Job and Color Group.

Remedy

Decrease the speed at wich the conveyor is moving. Increase the Target Speed or Fan width or both for the current Color Group. Decrease the Percent Overlap for the current Color Group.

Related codes

PAIN-383WARN Recip zone header error/missingPAIN-384WARN Job … has zone data errorsPAIN-386WARN … moves wrong wayPAIN-387WARN … moves out of order

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →