FANUC Alarm PALL-067 — Reg value not set …
Manufacturer wording — Reg value not set %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PALL-067 (“Reg value not set …”): Could not set an internally calculated value V to the register R. First check: From the DATA menu, verify that the register is defined, is in the range 1-64, and has the correct value.
Updated 2026-09-17 · LogrobotLM reference
Description
Could not set an internally calculated value V to the register R.
Remedy
From the DATA menu, verify that the register is defined, is in the range 1-64, and has the correct value. Must ABORT ALL and retry.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →