LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PALL-198 — Other error: row …

Manufacturer wording — Other error: row %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PALL-198 (“Other error: row …”): This is a general configuration table error. First check: In the Sequence menu, you need to make sure that for the total number of picks, you clearly indicate how all the units are put down.

Updated 2026-09-17 · LogrobotLM reference

Description

This is a general configuration table error.

Remedy

In the Sequence menu, you need to make sure that for the total number of picks, you clearly indicate how all the units are put down. Ex: Pick 3, place_1_1_1.

Related codes

PALL-196Pick too big error: row …PALL-197Illegal place sequence: row …PALL-199All units not listed in FlipConfigPALL-200All units not listed in NoFlip

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →