LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PALT-067 — PAUSE Reg value not set …

Manufacturer wording — PAUSE Reg value not set %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PALT-067 (“PAUSE Reg value not set …”): Could not set an internally calculated value V to the register R First check: From the DATA menu, verify that the register is defined, is in the range 1-64, and has the correct value.

Updated 2026-09-17 · LogrobotLM reference

Description

Could not set an internally calculated value V to the register R

Remedy

From the DATA menu, verify that the register is defined, is in the range 1-64, and has the correct value. Must ABORT ALL and retry

Related codes

PALT-065PAUSE Invalid reg value …PALT-066PAUSE Reg … could not be setPALT-068PAUSE Infeed/Pallet for UL … unknownPALT-069PAUSE Invalid UL … found

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →