LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PALT-212 — WARN DT file not read: …

Manufacturer wording — WARN DT file not read: %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PALT-212 (“WARN DT file not read: …”): The unitload data file transferred from PalletTool PC was not read because there is not enough memory to save the unitload on the robot. First check: Delete any unneeded data and coldstart.

Updated 2026-09-17 · LogrobotLM reference

Description

The unitload data file transferred from PalletTool PC was not read because there is not enough memory to save the unitload on the robot.

Remedy

Delete any unneeded data and coldstart.

Related codes

PALT-210WARN Xfer in process, cannot edit filePALT-211WARN Unitload not replaced.PALT-213ABORT Dropped part during recovery-abortPALT-214WARN The tool pointer length is changed.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →