LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PICK-014 — Error getting rob data …

Manufacturer wording — Error getting rob data %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PICK-014 (“Error getting rob data …”): An error occurred while reading data from robot ROBOT_NAME in the robot ring. First check: Look at the cause code with the error.

Updated 2026-09-17 · LogrobotLM reference

Description

An error occurred while reading data from robot ROBOT_NAME in the robot ring.

Remedy

Look at the cause code with the error. Make sure that Ethernet is set up correctly with all the robots. Check the Host Comm menu on each robot and make sure that all members are listed on each controller. Make sure ROSIPCFG.XML in FRS: refers to all members in the Host Comm menu.

Related codes

PICK-012Error reading LT enc scalePICK-013Max num of robots exceededPICK-015Move-TO could not executePICK-016Frame was not taught.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →