FANUC Alarm PNT1-013 — Job is not found

Manufacturer wording — Job (%s) is not found
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-013 (“Job is not found”): The teach pendant JOB program is not loaded, or was not created on the controller. First check: A teach pendant JOB program must be created or loaded in the controller before attempting to run it in production.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →