FANUC Alarm PNT1-014 — Invalid job … in queue
Manufacturer wording — Invalid job %s in queue
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT1-014 (“Invalid job … in queue”): An invalid job number was received from the PLC. First check: At the PLC, initialize the robot with a valid job number in order to receive a job read acknowledge from the robot.
Updated 2026-09-17 · LogrobotLM reference
Description
An invalid job number was received from the PLC. Therefore, the robot cannot put the job into the job queue.
Remedy
At the PLC, initialize the robot with a valid job number in order to receive a job read acknowledge from the robot.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →