LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-071 — … skipped-over max travel

Manufacturer wording — %s skipped-over max travel
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-071 (“… skipped-over max travel”): For line tracking systems only: This is a warning that the part has tracked too far to be played back. First check: Decrease the cycle time of the job or decrease the color change cycle.

Updated 2026-09-17 · LogrobotLM reference

Description

For line tracking systems only: This is a warning that the part has tracked too far to be played back. The previous job or color change took too long to play. The robot will ignore this job/color.

Remedy

Decrease the cycle time of the job or decrease the color change cycle.

Related codes

PNT1-069Part Detect less than min distPNT1-070Conveyor direction incorrectPNT1-072Tracking encoder disconnectedPNT1-073Right-Hand Rule only for this robot

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →