FANUC Alarm PNT1-095 — Fence open during production
FANUC PNT1-095 (“Fence open during production”): The FENCE1 and FENCE2 circuits are open on the EMG control board. First check: Determine the cause of the FENCE1 and FENCE2 open circuits, and correct the problem.
Updated 2026-08-29 · LogrobotLM reference
Description
The FENCE1 and FENCE2 circuits are open on the EMG control board.
Remedy · Remède
Determine the cause of the FENCE1 and FENCE2 open circuits, and correct the problem.
Frequently asked · Questions fréquentes
- What does FANUC alarm PNT1-095 mean?
- FANUC PNT1-095 (“Fence open during production”): The FENCE1 and FENCE2 circuits are open on the EMG control board.
- How do you troubleshoot FANUC alarm PNT1-095?
- Determine the cause of the FENCE1 and FENCE2 open circuits, and correct the problem.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →