FANUC Alarm PNT1-097 — HOLD active
FANUC PNT1-097 (“HOLD active”): A HOLD signal, either from the UOP or the teach pendant, has been activated. First check: Remove the HOLD condition, and press RESET.
Updated 2026-09-17 · LogrobotLM reference
Description
A HOLD signal, either from the UOP or the teach pendant, has been activated.
Remedy
Remove the HOLD condition, and press RESET.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →