FANUC Alarm PNT1-246 — Max output has flow < setpoint

Manufacturer wording — %sMax output has flow < setpoint
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-246 (“Max output has flow < setpoint”): With a maximum control output, the flow rate was measured to be lower than the setpoint (requested flow). First check: Check the following:

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →