LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-255 — RDU Full - Proc Champ disabled

FANUC PNT1-255 (“RDU Full - Proc Champ disabled”): The report file generated by Process Champion has filled the RDU device to its capacity. First check: For R-J3 controller only.

Updated 2026-09-17 · LogrobotLM reference

Description

The report file generated by Process Champion has filled the RDU device to its capacity. This forces the system to disable Process Champion auto mode so that no further auto appending is performed on the file. The file has been copied to FR: and is deleted from RDU:.

Remedy

For R-J3 controller only. Re-enable Process Champion auto mode by setting the Set Process Champion Mode item, in the SETUP Production screen, to Auto. To prevent FR: from filling to capacity, remove the file from FR: to another device such as a PCMCIA card.

Related codes

PNT1-249Max output has feed < setpointPNT1-250Min output has feed > setpointPNT1-258HIGH SpeedDock TORQUE: …PNT1-259SpeedDock motor not ready

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →