FANUC Alarm PNT1-407 — Applicator enable is ON

Manufacturer wording — %sApplicator enable is ON
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-407 (“Applicator enable is ON”): This message is displayed when the applicator valve enable input turns on. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →