LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-406 — Applicator enable is OFF

Manufacturer wording — %sApplicator enable is OFF
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-406 (“Applicator enable is OFF”): This message is displayed when the applicator valve enable input turns off. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

This message is displayed when the applicator valve enable input turns off. When this input is off, the GUN trigger outputs are blocked from turning on.

Remedy

None.

Related codes

PNT1-400Applicator enable is OFFPNT1-401Applicator enable is ONPNT1-407Applicator enable is ONPNT1-412Error reading gun-on time for job

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →