LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-401 — %sApplicator enable is ON

FANUC PNT1-401 (“%sApplicator enable is ON”): This message is displayed when the applicator valve enable input turns on. First check: None.

Updated 2026-08-29 · LogrobotLM reference

Description

This message is displayed when the applicator valve enable input turns on.

Remedy · Remède

None.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-401 mean?
FANUC PNT1-401 (“%sApplicator enable is ON”): This message is displayed when the applicator valve enable input turns on.
How do you troubleshoot FANUC alarm PNT1-401?
None.

Related codes / Codes liés

PNT1-395%sRobot not at maintenance positionPNT1-400%sApplicator enable is OFFPNT1-406%sApplicator enable is OFFPNT1-407%sApplicator enable is ON

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →