LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-559 — %sCalibration aborted

Description

Accuflow calibration could not continue. This might be due to the fluid lines not being filled. Check for other alarms in the log.

Remedy · Remède

The best remedy might be found from the previous alarm in the log. This is usually the result of incorrect setup parameters, or incomplete hardware setup. If the flow hardware is operating correctly, set the color parameter for the pulsing pump supply to YES.

Related codes / Codes liés

PNT1-557%sFlow rate avg. error excessivePNT1-558%sCalibration successfulPNT1-560%sCal. low flow rate resetPNT1-561%sCal. max. flow rate reset

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.