LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-585 — CH2:Dyn. yield > tolerance band (%s)

FANUC PNT1-585 (“CH2:Dyn. yield > tolerance band (%s)”): As a particular flow rate set point is being output, the yield ((cc/min)/cnt) for that flow rate was larger than the tolerance band for it. First check: Decrease the yield.

Updated 2026-08-29 · LogrobotLM reference

Description

As a particular flow rate set point is being output, the yield ((cc/min)/cnt) for that flow rate was larger than the tolerance band for it. It is not likely that the set point will be reached. This might occur if the restrictors in the gun are too large.

Remedy · Remède

Decrease the yield. Use smaller restrictors in the gun if the high end flow rate can still obtained. Otherwise, accept a larger tolerance band. If the value given in the alarm is equal to the Minimum tolerance band, set the minimum tolerance band equal to the yield for that color. Otherwise, increase the Percent tolerance band.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT1-585 mean?
FANUC PNT1-585 (“CH2:Dyn. yield > tolerance band (%s)”): As a particular flow rate set point is being output, the yield ((cc/min)/cnt) for that flow rate was larger than the tolerance band for it. It is not likely that the set point will be reached. This might occur if the restrictors in the gun are too large.
How do you troubleshoot FANUC alarm PNT1-585?
Decrease the yield. Use smaller restrictors in the gun if the high end flow rate can still obtained. Otherwise, accept a larger tolerance band. If the value given in the alarm is equal to the Minimum tolerance band, set the minimum tolerance band equal to the yield for that color. Otherwise, increase the Percent…

Related codes / Codes liés

PNT1-583%sCal. table adapted out tolerancePNT1-584%sCal. table adapted in tolerancePNT1-586%sFlow rate average error highPNT1-587%sCalibration successful

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →