FANUC Alarm PNT1-588 — %sCalibration aborted
FANUC PNT1-588 (“%sCalibration aborted”): Accuflow calibration could not continue. First check: The best remedy might be found from the previous alarm in the log.
Updated 2026-08-29 · LogrobotLM reference
Description
Accuflow calibration could not continue. This might occur if the fluid lines have not been filled. Check for other alarms in the log.
Remedy · Remède
The best remedy might be found from the previous alarm in the log. This is usually the result of incorrect setup parameters, or incomplete hardware setup. If the flow hardware is operating correctly, set the color parameter for pulsing pump supply to YES.
Frequently asked · Questions fréquentes
- What does FANUC alarm PNT1-588 mean?
- FANUC PNT1-588 (“%sCalibration aborted”): Accuflow calibration could not continue. This might occur if the fluid lines have not been filled. Check for other alarms in the log.
- How do you troubleshoot FANUC alarm PNT1-588?
- The best remedy might be found from the previous alarm in the log. This is usually the result of incorrect setup parameters, or incomplete hardware setup. If the flow hardware is operating correctly, set the color parameter for pulsing pump supply to YES.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →