LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-919 — Macro not acknowledged

Manufacturer wording — %sMacro not acknowledged
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-919 (“Macro not acknowledged”): The previous macro was not acknowledged. First check: Change the teach pendant program so that this waits on the other robot between release macros.

Updated 2026-09-17 · LogrobotLM reference

Description

The previous macro was not acknowledged.

Remedy

Change the teach pendant program so that this waits on the other robot between release macros.

Related codes

PNT2-917Illegal macro argumentPNT2-918Macro waiting for aborted robotPNT2-921%Check if SERVOTOOL END instr. existsPNT2-922Hood/Deck Opener Lost Part

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →