LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-013 — WARN No analog input sequence for bd

FANUC PRIO-013 (“WARN No analog input sequence for bd”): An attempt was made to delete an analog input sequence that has not been defined. First check: Check the rack and/or slot number and that an analog input sequence has previously been defined.

Updated 2026-09-17 · LogrobotLM reference

Description

An attempt was made to delete an analog input sequence that has not been defined.

Remedy

Check the rack and/or slot number and that an analog input sequence has previously been defined.

Related codes

PRIO-011WARN Assignment overlaps existing onePRIO-012WARN Bad board addressPRIO-014WARN Analog input sequnce too longPRIO-017WARN I/O point not simulated

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →