LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-017 — WARN I/O point not simulated

FANUC PRIO-017 (“WARN I/O point not simulated”): Attempt to set the state of an input port that is not simulated. First check: Use the I/O menu or the SET_PORT_SIM KAREL built-in to set the port simulated or do not set the port.

Updated 2026-09-17 · LogrobotLM reference

Description

Attempt to set the state of an input port that is not simulated.

Remedy

Use the I/O menu or the SET_PORT_SIM KAREL built-in to set the port simulated or do not set the port.

Related codes

PRIO-013WARN No analog input sequence for bdPRIO-014WARN Analog input sequnce too longPRIO-020STOP I/O Link comm error …, …, …, … (hex)PRIO-021SYST Unknown I/O hardware

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →