LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-220 — EGD Producer name/IP not init

FANUC PRIO-220 (“EGD Producer name/IP not init”): EGD Producer name/IP address is not initialized. First check: On the EGD screen, type the robot IP address in the Producer Name/IP: field.

Updated 2026-09-17 · LogrobotLM reference

Description

EGD Producer name/IP address is not initialized.

Remedy

On the EGD screen, type the robot IP address in the Producer Name/IP: field.

Related codes

PRIO-213FIPIO Connection EstablishedPRIO-214FIPIO Connection RecoveredPRIO-221EGD Consumer size misconfiguredPRIO-222EGD Consumer init failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →