LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-222 — EGD Consumer init failed

FANUC PRIO-222 (“EGD Consumer init failed”): The EGD Consumer task initilization failed. First check: The consumer module is not loaded on the robot.

Updated 2026-09-17 · LogrobotLM reference

Description

The EGD Consumer task initilization failed. The consumer module is not loaded on the robot.

Remedy

The consumer module is not loaded on the robot. Re-load the EGD option.

Related codes

PRIO-220EGD Producer name/IP not initPRIO-221EGD Consumer size misconfiguredPRIO-223EGD Producer socket errorPRIO-224EGD System Error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →