LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PROG-048 — PAUSE Shift released while running

Manufacturer wording — PAUSE Shift released while running (%s^7)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PROG-048 (“PAUSE Shift released while running”): The shift key was released while the program is executing. First check: Hold the shift key and press the FWD key to resume execution.

Updated 2026-09-17 · LogrobotLM reference

Description

The shift key was released while the program is executing.

Remedy

Hold the shift key and press the FWD key to resume execution.

Related codes

PROG-046PAUSE TP is enabled while runningPROG-047PAUSE TP is disabled while runningPROG-049WARN Cannot release, robot movingPROG-050WARN Abort still in progress

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →