LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-046 — STOP Seal not start

FANUC SEAL-046 (“STOP Seal not start”): The gun full open signal(DI) has been on for the set time since sealing start. First check: Check the gun full open signal of the sealing equipment, disable the check for this feature, or set the timeout for a longer period.

Updated 2026-09-17 · LogrobotLM reference

Description

The gun full open signal(DI) has been on for the set time since sealing start.

Remedy

Check the gun full open signal of the sealing equipment, disable the check for this feature, or set the timeout for a longer period.

Related codes

SEAL-044STOP Low pressure (E…)SEAL-045STOP High pressure (E…)SEAL-047STOP Seal interruptSEAL-048ABORT Dispenser mode mismatch (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →