FANUC Alarm SEAL-044 — STOP Low pressure (E%d)
FANUC SEAL-044 (“STOP Low pressure (E%d)”): The pressure signal is below its lower limit for set time when the sealant is dispensed. First check: Check the pressure signal of the sealing equipment, disable to check the low pressure signal, or set the time low pressure timeout to a larger value.
Updated 2026-08-29 · LogrobotLM reference
Description
The pressure signal is below its lower limit for set time when the sealant is dispensed.
Remedy · Remède
Check the pressure signal of the sealing equipment, disable to check the low pressure signal, or set the time low pressure timeout to a larger value.
Frequently asked · Questions fréquentes
- What does FANUC alarm SEAL-044 mean?
- FANUC SEAL-044 (“STOP Low pressure (E%d)”): The pressure signal is below its lower limit for set time when the sealant is dispensed.
- How do you troubleshoot FANUC alarm SEAL-044?
- Check the pressure signal of the sealing equipment, disable to check the low pressure signal, or set the time low pressure timeout to a larger value.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →