FANUC Alarm SEAL-045 — STOP High pressure (E…)
Manufacturer wording — STOP High pressure (E%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC SEAL-045 (“STOP High pressure (E…)”): The pressure signal is above its upper limit for set time when the sealant is dispensed. First check: Check the pressure signal of the sealing equipment, disable to check the high pressure signal, or set the time high pressure timeout to a larger value.
Updated 2026-09-17 · LogrobotLM reference
Description
The pressure signal is above its upper limit for set time when the sealant is dispensed.
Remedy
Check the pressure signal of the sealing equipment, disable to check the high pressure signal, or set the time high pressure timeout to a larger value.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →