LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-055 — ABORT Part ID out of range

FANUC SEAL-055 (“ABORT Part ID out of range”): The Part ID in the JOB header is out of the allowed range for this robot. First check: Make sure the Part ID in the JOB header is between 0 and the maximum Part ID allowed on this equipment.

Updated 2026-09-17 · LogrobotLM reference

Description

The Part ID in the JOB header is out of the allowed range for this robot.

Remedy

Make sure the Part ID in the JOB header is between 0 and the maximum Part ID allowed on this equipment.

Related codes

SEAL-053WARN Robot is in dry run modeSEAL-054WARN Robot lock mode is ONSEAL-056WARN Dispenser not ready (E…)SEAL-057WARN Dispenser fault (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →