LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-269 — WARN Flow command below set point (E…)

Manufacturer wording — WARN Flow command below set point (E%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-269 (“WARN Flow command below set point (E…)”): This error is reported when the computed flow rate command is less than the minimum flow rate specified by the user during the equipment setup. First check: Refer to dispensing equipment for fault details.

Updated 2026-09-17 · LogrobotLM reference

Description

This error is reported when the computed flow rate command is less than the minimum flow rate specified by the user during the equipment setup.

Remedy

Refer to dispensing equipment for fault details.

Related codes

SEAL-267STOP Volume dispensed out of range (E…)SEAL-268WARN Flow rate is zero (E…)SEAL-270WARN Flow command above set point (E…)SEAL-271WARN Channel 2 analog is zero (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →