LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-270 — WARN Flow command above set point (E…)

Manufacturer wording — WARN Flow command above set point (E%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-270 (“WARN Flow command above set point (E…)”): This error is reported when the computed flow rate command is great than the user specified (or calibrated) maximum flow rate, which is specified under the equipment setup. First check: Refer to dispensing equipment for fault details.

Updated 2026-09-17 · LogrobotLM reference

Description

This error is reported when the computed flow rate command is great than the user specified (or calibrated) maximum flow rate, which is specified under the equipment setup.

Remedy

Refer to dispensing equipment for fault details.

Related codes

SEAL-268WARN Flow rate is zero (E…)SEAL-269WARN Flow command below set point (E…)SEAL-271WARN Channel 2 analog is zero (E…)SEAL-272WARN Channel 2 analog is below set point (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →